Spartan Titan Pro 2-7/8″ Round Tennis Net Posts with Stainless Steel Internal Winder – USA Manufactured

Spartan Titan Pro 2-7/8″ Round Tennis Net Posts Specifications

• Post Diameter: 2-7/8″ OD (Ideal for 3″ or 2-7/8″ sleeves)
• Wall Thickness: 10-gauge USA Steel (28% thicker than the industry standard 12-gauge)
• Winder: Self-locking stainless steel internal mechanism
• Anti-Rust Finish: Interior and exterior zinc galvanization
• Length: 60″ total (42″ regulation height above surface)
• Hardware: Aluminum caps and pulleys; welded steel lacing rods
• Warranty: 5-Year Limited Warranty
• Note: Ground sleeves and center strap anchors sold separately.

Spartan Titan Pro 2-7/8″ Round Tennis Net Posts Overview

We manufacture the Spartan Titan Pro 2-7/8″ posts using 10-gauge USA steel — significantly thicker walls than the 12-gauge tubing that dominates the category. A regulation tennis net pulls hard on its posts year after year, in every weather condition, and that extra wall thickness gives the post the mechanical capacity to handle the load with margin to spare. It’s why these posts are a reliable choice for tournament complexes, high-traffic tennis clubs, and any facility where post replacement isn’t something you want to think about.

The Spartan Titan Pro sits at the top of our tennis net posts catalog and is built for facilities that want the strongest, longest-lasting post on the market. The 2-7/8″ diameter works equally well for new installations and retrofits into existing 3″ sleeves — the same post serves both jobs, which is one of the reasons it’s the workhorse of the line.

Spartan Titan Pro Interior + Exterior Galvanization

Steel posts that live outdoors face a hidden enemy: condensation that gets trapped inside the tube and slowly rusts the interior wall — damage you can’t see until the post structurally weakens years down the road. Most manufacturers only coat the exterior, which leaves the interior wide open to that slow internal corrosion. The Spartan Titan Pro 2-7/8″ posts are zinc-plated on both surfaces, blocking rust on every wall of the tube. Over the exterior zinc, we apply a baked-on polyester powder coat that handles UV and surface moisture. Two complementary layers, each doing a different job — which is why these posts hold up in coastal air, Southern humidity, and any climate that punishes steel.

Spartan Titan Pro 10-Gauge USA Steel

The Spartan Titan Pro 2-7/8″ posts are built from 10-gauge USA-rolled steel — 28% thicker walls than the 12-gauge tubing that most posts in this category use. That extra steel gives the post noticeably greater bending strength and the mechanical capacity to hold a regulation tennis net taut, year after year, without flex or fatigue.

Spartan Titan Pro Internal Stainless Winder

The Spartan Titan Pro uses solid stainless steel gears instead of the brass found in most competing posts. Stainless is significantly harder than brass, so the teeth don’t round off or slip after years of cranking the net tight. The full gear set sits sealed inside the steel post body, keeping rain, dust, and court debris out of the mechanism. Smooth net adjustments, season after season, regardless of weather.

Spartan Titan Pro Built for Retrofits and New Installs

The Spartan Titan Pro 2-7/8″ works equally well for new builds and retrofits into existing 3″ sleeves. The slight clearance between post and sleeve lets the steel slide past dirt or grit that has settled inside older sleeves over the years. Once dropped into place, the welded lacing rods act as built-in depth stops — the post seats at exact regulation height, no shimming or field measuring required.