Spartan Titan Pro Square Surface Mount Pickleball Net Posts with Stainless Steel Internal Winder | USA Manufactured

Spartan Titan Pro Square Surface Mount Pickleball Net Posts Specifications

• Post Profile: 3″ square
• Wall Thickness: 11-gauge USA steel (14% thicker than the 12-gauge industry standard)
• Mounting: Surface mount with 7″ x 7″ pre-drilled base plates
• Anti-Rust Finish: Interior and exterior zinc galvanization with baked-on polyester powder coat
• Winder: Self-locking stainless steel internal mechanism
• Height: 36″ regulation net height above surface
• Colors: Green or black
• Warranty: 5-Year Limited Warranty
• Note: Concrete anchors and pickleball nets sold separately.

Spartan Titan Pro Surface Mount Pickleball Net Posts Overview

The Spartan Titan Pro Surface Mount posts bolt directly to existing concrete — no core-drilling, no ground sleeves, no demolition. Manufactured in the USA from 11-gauge steel, they’re built for community centers, rooftop courts, school multi-use pads, and private residential courts where the concrete is already in place. The 7″ x 7″ base plate gives the post a wide, stable footprint that holds up to years of pickleball play without working loose.

If you are comparing options across our pickleball net posts catalog, the Spartan Titan Pro Surface Mount delivers the same build quality as our traditional in-ground Titan Pro — same 11-gauge USA steel, same stainless winder, same dual-surface galvanization. The only difference is how the post connects to the court.

Spartan Titan Pro Inside-Out Galvanization

Most net posts only get a zinc layer on the exterior wall, leaving the raw interior steel exposed to condensation and trapped rainwater. Over a few seasons, that hidden moisture rusts the steel from the inside out — invisible damage that quietly compromises the post until it fails.

The Spartan Titan Pro Surface Mount posts are zinc-plated on both the interior and exterior walls, blocking corrosion on every surface where water tends to pool. Over the exterior zinc, we apply a baked-on polyester powder coat that handles UV exposure and resists surface chipping. Two layers, two different jobs — the kind of multi-stage protection that keeps these posts solid in humid climates, coastal air, and high-use facilities where standard hardware fails years sooner.

Spartan Titan Pro 11-Gauge USA Steel

The Spartan Titan Pro Surface Mount uses 11-gauge USA steel — 14% thicker walls than the 12-gauge tubing on most surface-mount posts. Square tubing is inherently more rigid than round tubing of the same wall thickness, which is why 11-gauge is the right gauge for this format: enough wall to handle the load, paired with the structural geometry that does the heavy lifting. Combined with the 7″ x 7″ base plate footprint, the post stays plumb and steady through years of regular play.

Spartan Titan Pro Self-Locking Stainless Winder

A net post is only as reliable as its winder. Most surface-mount posts use brass internal gears, which can strip when you crank hard to get that last bit of slack out of the net. The Spartan Titan Pro uses solid stainless steel gears instead — significantly harder than brass, so the teeth handle high-torque tensioning without wear or fatigue. The self-locking design holds the net at exact regulation height once you set it, no drift between matches.

Spartan Titan Pro Bolt-Down Installation

Core-drilling deep holes into a concrete slab is messy, expensive, and permanent.  The Spartan Titan Pro Surface Mount solves this with a 7″ x 7″ pre-drilled steel base plate that bolts directly to the existing surface using standard concrete anchors — no core-drilling, no curing time, no permanent damage to the slab. It’s the practical choice for multi-use athletic pads, rooftop courts, and indoor facilities where you need to set up a regulation court without tearing into the floor.