Spartan Titan Pro 2-7/8″ Round Pickleball Net Posts with Stainless Steel Internal Winder – USA Manufactured

Spartan Titan Pro 2-7/8″ Internal Wind Pickleball Net Posts Specifications

• Post Diameter: 2-7/8″ OD (Fits all standard 3″ sleeves)
• Wall Thickness: 10-gauge USA Steel (28% thicker than the 12-gauge industry standard)
• Anti-Rust Finish: Interior and exterior zinc galvanization
• Winder Mechanism: Self-locking stainless steel internal gears
• Height: 54″ total (36″ regulation height above court)
• Hardware: Cast aluminum caps and pulleys, welded steel lacing rods
• Warranty: 5-Year Limited Warranty
• Note: Ground sleeves and center anchors sold separately.

Spartan Titan Pro 2-7/8″ Pickleball Net Posts Overview

We manufacture the Spartan Titan Pro 2-7/8″ round posts using 10-gauge USA steel — significantly thicker walls than the 12-gauge tubing most pickleball posts are built from. That extra steel means a post that’s overbuilt for the sport, which translates to a longer service life, better resistance to impact, and a structure that simply will not fatigue under decades of normal pickleball use. The 2-7/8″ diameter is the universal industry standard, so these posts drop cleanly into any new construction or standard ground sleeve retrofit.

The Spartan Titan Pro sits at the top of our pickleball net posts catalog and is built for facilities that want the strongest, longest-lasting post available — clubs, schools, tournament venues, and serious residential courts where the cost of replacing posts every few years adds up.

Dual-Surface Protection: Why Internal Galvanization Matters

Most outdoor posts fail because they rust from the inside out. Standard posts only feature a zinc coating on the exterior, leaving the internal walls completely exposed to trapped condensation.

Our Titan Pro series 2-7/8″ posts eliminate this risk by applying a uniform zinc plating to both the interior and exterior walls. This dual-sided layer blocks internal rust from weakening the steel frame. We then finish the exterior with a baked-on powder coat. This delivers an ultra-smooth, multi-layer barrier built to withstand high humidity and coastal environments.

Spartan Titan Pro Dual-Surface Galvanization

Most outdoor steel posts rust from the inside out, not the outside in. Standard manufacturing only coats the exterior surface, which leaves the interior wall exposed to trapped condensation that quietly corrodes the steel from within. The Spartan Titan Pro applies a uniform zinc layer to both the interior and exterior walls, blocking corrosion on every surface of the post. A baked-on polyester powder coat goes over the exterior zinc to seal the steel against UV exposure and surface moisture. The result is a multi-layer barrier built to hold up in humid climates, coastal air, and high-use public facilities — environments that destroy posts coated on only one side.

Spartan Titan Pro Stainless Steel Winder

The Spartan Titan Pro internal tensioning system uses stainless steel gears rather than the soft brass gears found in most competing posts. Stainless steel is significantly harder than brass, so it resists stripping and corrosion far better over decades of use. The self-locking mechanism delivers smooth, precise net height adjustments and holds tension reliably between matches. The full winder assembly sits enclosed inside the post body, which protects the moving parts from rain, debris, and direct weather exposure.

Precision Fit for 3″ Ground Sleeves

The Spartan Titan Pro 2-7/8″ posts slide directly into standard 3″ PVC or steel ground sleeves. The outer diameter is sized to provide just enough clearance to drop in cleanly past any dirt or grit that has settled into the sleeve over the years. That same clearance makes seasonal removal straightforward for winter storage or court resurfacing.